chrome extension ubiquiti device discovery tool

#CHROME EXTENSION UBIQUITI DEVICE DISCOVERY TOOL UPGRADE#
#CHROME EXTENSION UBIQUITI DEVICE DISCOVERY TOOL SOFTWARE#
#CHROME EXTENSION UBIQUITI DEVICE DISCOVERY TOOL PASSWORD#

Note: You can click Configure to change the settings of the UniFi Cloud Key.

Click Manage to run the UniFi Setup Wizard.

In the address field, type followed by the appropriate IP address.

Note: The default fallback IP address of the UniFi Cloud Key is 192.168.1.30. Assign a specific IP address to the UniFi Cloud Key, or check the DHCP server for its IP address.

The UniFi Cloud Key is set to DHCP by default, so it will try to automatically obtain an IP address.

You can manage your UniFi devices and view network statistics using the UniFi Controller management interface.įor information on configuring and using the UniFi Controller software, refer to the User Guide located on our website: ui.com/download/unifi Instructions for Other Web Browsers The UniFi Controller management interface will appear.

Click Launch to open the UniFi Controller remotely.

Go back to the UniFi Controller tab ( ) in your browser and wait for the UniFi Controller to be adopted.

Enter your ui.com account credentials and click Enable Cloud Access.

Note: For step-by-step instructions, refer to the User Guide, which is available at ui.com/download/unifi

The UniFi Setup Wizard screen appears.

Click Open Controller Wizard to set up the Controller on the Cloud Key.

#CHROME EXTENSION UBIQUITI DEVICE DISCOVERY TOOL UPGRADE#

If the Cloud Key firmware is not the latest version, click Upgrade Firmware to upgrade the firmware.

Click Adopt in the Cloud Key’s Actions column to continue.

The Ubiquiti Device Discovery Tool will search for the UniFi Cloud Key.

If the tool is not installed, you will be prompted to add it.

If the Ubiquiti Device Discovery Tool is already installed, proceed to step 7.

Enable the Discover Cloud Key option at the top right.

#CHROME EXTENSION UBIQUITI DEVICE DISCOVERY TOOL PASSWORD#

Enter the username and password for your Ubiquiti account.Launch the Chrome web browser and type in the address field.Ensure that your host system is on the same Layer-2 network as the UniFi Cloud Key.If you are using a different web browser, go to the Instructions for Other Web Browsers section.If you are using Chrome, go to the Chrome Instructions section (recommended).Use one of the following methods to launch the software:

#CHROME EXTENSION UBIQUITI DEVICE DISCOVERY TOOL SOFTWARE#

The UniFi Controller software is pre-installed on the UniFi Cloud Key.

Use an 802.3af-compliant switch, such as a UniFi Switch, or a USB power source (not included).

This slot is used to back up the Cloud Key configuration to the microSD card (included). Optional power source (5V, minimum 1A) if PoE is not available. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.Restart Press and release the Reset button quickly.Power can be provided by an 802.3af PoE switch, such as the UniFi PoE Switch. This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. After pressing the button, wait until the LED goes off, and then unplug the Cloud Key. Press the Shutdown button to initiate a graceful shutdown (all services will be shut down and the CPU will remain active). This usually indicates that a process such as a firmware upgrade is taking place. Web Browser: Google Chrome (Other browsers may have limited functionality.) Hardware Overviewĭevice is busy do not touch or unplug it.

Chrome extension ubiquiti device discovery tool